COBB Front Sway Bar 24mm 2-Position Adjustable WRX | CB-F51Z

COBB's CB-F51Z is a 24 mm solid front sway bar for the 2022-2026 WRX. Two end-link mounting positions let the installer choose between the available stiffness settings, while the supplied bushings replace the factory bar bushings. The bar is intended to reduce front body roll and sharpen transient response; its effect on balance depends on the rear bar, alignment, tires, and chosen adjustment hole. It fits manual and SPT/CVT VB models, including the TR, but owners should confirm any tS-specific application directly because suspension specifications can differ. Reuse or replacement of end links should be assessed during installation, and the bushings should be lubricated and the hardware torqued at normal ride height where specified.