
Image from Drunkmann Tuning
Drunkmann Tuning
Cost range
$150
Tracked current price
$150.00 · via Felix Performance · checked Oct 11
Price History
This Drunkmann off-the-shelf map is intended for a 2022-2026 WRX 6MT retaining the stock intake and using the selected 91, 91 ACN, 92, or 93-octane fuel. It is a fixed calibration rather than a custom e-tune, and the seller requires the buyer's Accessport serial information for delivery. The current listing excludes SPT/CVT cars. A compatible COBB Accessport V3 is required, and its firmware should be current before the map is loaded. Use only the fuel grade selected and keep the factory intake configuration intact. An aftermarket intake, J-pipe, boost-control change, or other unlisted airflow/fuel modification can invalidate the calibration and should be discussed with the tuner before driving under boost.
Ranked by lowest tracked price when available.
Felix Performance
Recommended$150.00 · checked Oct 11
Sign in to save this mod to your planner.
Sign in to leave a verified owner note once this mod is installed on one of your builds.
Related FAQ answers that may help before you buy or install.
Off-the-shelf map for a stock or lightly modded VB - they are genuinely good on this platform. E-tune once your hardware combination stops matching any OTS map. Pro tune for big turbo or ethanol builds.
Yes, if you are past warranty concerns. It is the single best value modification on the platform - roughly 35 wheel horsepower and a 48 percent torque increase, which no bolt-on comes close to.
Requires the factory intake system, selected pump-fuel grade, compatible COBB Accessport V3, and a 2022-2026 WRX 6MT. Current listing excludes SPT/CVT cars.
Source: Manufacturer
View sourceWe list install guides, videos, and reference material here when they meet our quality bar for this mod.
Generation
VB
Category
Engine ManagementCompatibility Notes
1
Owner Notes
0