Browse WRX VB mods

PERRIN's PSP-OIL-203 adds an external SPT/CVT fluid cooler to 2022-2025 WRX Base models that were not supplied with the factory front cooler. The full kit uses an eight-row bar-and-plate core, stainless mounting brackets, M22 fittings, and the hoses and con...

PERRIN's PSP-OIL-202 replaces the factory external SPT/CVT cooler on equipped 2022-2026 WRX models with a larger front-mounted bar-and-plate core. The kit reuses the vehicle's cooler hoses and adds application-specific stainless brackets and M22 fittings, m...

The PERRIN PSP-OIL-115 kit adds a front-mounted bar-and-plate engine-oil cooler to the 2022-2026 WRX six-speed manual. A thermostatic filter spacer begins routing oil through the cooler near 85 degrees C, and the complete kit includes the core, stainless mo...

The PERRIN Pitch Stop Mount replaces Subaru's molded factory link with a machined aluminum body and polyurethane bushings to reduce fore-aft drivetrain movement during on/off-throttle transitions. The current product family includes a Street Series configur...

Perrin Short Turbo Inlet Hose Black replaces the restrictive factory inlet to optimize airflow into the turbocharger. This enhanced inlet hose is designed for compatibility with various aftermarket intakes for improved turbo efficiency.

The PERRIN Super Shifter Stop bolts to the factory shifter assembly and limits excess movement around the first- and second-gear gate. Unlike PERRIN's standard stop, this version includes additional pieces that address both horizontal and vertical play. The...

The Process West PWCAI10 replaces the factory VB WRX intake with a black mandrel-bent aluminum tube, enclosed airbox, K&N filter, and machined mount for the original airflow meter. It retains the factory intake duct and installs without cutting or permanent...

Racecomp Engineering’s Yellow Sport springs replace the factory coils while retaining the WRX VB’s original dampers. The set uses 360 lb/in front and 370 lb/in rear rates and lowers both axles approximately 25 mm. RCE developed the springs for the VB chassi...

Remark's mufflerless axle-back is a two-piece, bolt-on system for the 2022+ Subaru WRX VB. It connects to the factory midpipe, uses 2.5-inch T304 stainless-steel tubing, and finishes with four 3.5-inch tips. Buyers can select single-wall or double-wall tips...

Remark's Sports Touring cat-back is its flagship muffled system for the 2022+ Subaru WRX VB with the FA24F engine. The four-piece T304 stainless assembly uses a 3-inch front section that divides into dual 2.5-inch rear pipes, two mufflers, and four 4-inch t...

SPC part 67660 replaces one factory rear lower control arm and provides on-car camber adjustment through an outboard cam. The high-strength stamped-steel arm uses SPC’s sealed xAxis joint and includes mounting hardware plus an offset bonded-rubber toe bushi...

Subaru 26692VC050 is the rear-left gold two-piston Brembo caliper used by the 2025-2026 WRX tS high-performance brake system. The prior title incorrectly called this rear caliper a six-piston unit; Subaru specifies six pistons only at the front and dual-pis...

Subaru 26692VC040 is the rear-right gold two-piston Brembo caliper used by the 2025-2026 WRX tS high-performance brake system. The prior title incorrectly called this rear caliper a six-piston unit; Subaru specifies six pistons only at the front and dual-pi...

Subaru 26692VC030 is the rear-left red two-piston Brembo caliper fitted to the 2024 WRX TR. The catalog previously misidentified it as a gold tS six-piston caliper; Subaru parts data confirms a 2024 WRX rear-left application, and the image depicts the red r...

Subaru 26692VC020 is the rear-right red two-piston Brembo caliper fitted to the 2024 WRX TR. This side-specific service part is one component of the factory high-performance brake system, not a complete retrofit package. A non-Brembo WRX conversion needs th...

Subaru 26292VC010 is the front-left red six-piston Brembo caliper fitted to the 2024 WRX TR. It is a side-specific factory replacement caliper, not a complete conversion kit and not interchangeable with a standard WRX floating caliper. A conversion on a 202...

Subaru 26292VC000 is the front-right red six-piston Brembo caliper fitted to the 2024 WRX TR. It is a side-specific factory replacement caliper, not a complete conversion kit and not interchangeable with a standard WRX floating caliper. A conversion on a 20...

Subaru 26449VA023 is the brake master-cylinder kit associated with the factory Brembo system on the 2024 WRX TR and 2025-2026 WRX tS, with related Subaru performance applications. Subaru specifically notes that the TR package combines larger Brembo calipers...

Subaru 26300VA000 is the factory front brake rotor used with the six-piston Brembo package on the 2024 WRX TR and 2025-2026 WRX tS, and it is shared with the related 2018-2021 STI application. Subaru specifies a 13.4-inch ventilated and cross-drilled front ...

Subaru 26290VC030 is the front-left brake dust shield used with the larger Brembo front brake package on WRX TR/tS applications. The shield provides clearance and protection around the 13.4-inch front rotor and is a side-specific supporting component, not a...

Subaru 28313VC050 is the front-left steering knuckle used by Brembo-equipped WRX TR/tS applications and is a key mounting component when adapting the factory six-piston front brake geometry to another VB WRX. It is a side-specific suspension and hub carrier...

Subaru 26290VC020 is the front-right brake dust shield used with the larger Brembo front brake package on WRX TR/tS applications. The shield provides clearance and protection around the 13.4-inch front rotor and is a side-specific supporting component, not ...

Subaru 28313VC040 is the front-right steering knuckle used by Brembo-equipped WRX TR/tS applications and is a key mounting component when adapting the factory six-piston front brake geometry to another VB WRX. It is a side-specific suspension and hub carrie...

Subaru 26696VA001 is the factory rear brake-pad set for the two-piston Brembo calipers used by the 2024 WRX TR and 2025-2026 WRX tS, with shared fitment to the related 2018-2021 STI brake package. The kit covers both rear calipers and is intended for the fa...