Browse WRX VB mods

Subaru 26700VA010 is the factory rear brake rotor used with the two-piston Brembo package on the 2024 WRX TR and 2025-2026 WRX tS, and it is shared with the related 2018-2021 STI application. Subaru specifies a 12.8-inch ventilated and cross-drilled rear di...

Subaru accessory J101SVC100 is a complete set of front and rear mud flaps for the 2022-2026 WRX. The molded black flaps carry WRX logos and include the model-specific mounting hardware needed for installation. They help reduce water, dirt, and mud spray fro...

The Titan 7 T-S5 is a fully forged split-five-spoke wheel with reinforced inner-rim geometry, machined details, and knurled bead seats. This 18x9.5 +40 5x114.3 configuration is offered as a square fitment and provides a performance-oriented balance of width...

Tomei's Expreme Ti Type-R is the single-exit full-titanium exhaust for the 2022+ WRX VB. The system uses approximately 3.2-inch piping and one 4.5-inch burnt-blue outlet, cutting assembled weight to about 17.9 pounds. Tomei supplies a removable sound reduce...

The Volk Racing TE37 SAGA S-Plus is a forged one-piece six-spoke wheel developed to increase strength and rigidity while preserving the TE37 form. This bronze 18x9.5 +38 5x114.3 configuration uses a racing-concave face, knurled bead seats, a 73.1 mm center ...

The WedsSport SA-25R is a one-piece performance wheel with a dense split-spoke design. Part 73752 is the Platinum Silver Black 18x9.5 +38 5x114.3 version, using the concave R face and a 73 mm center bore. Weds lists JWL compliance for its passenger-car whee...

Whiteline KTA216A replaces both factory rear lower control arms with adjustable stamped-steel assemblies. The pair uses cam-bolt and eccentric-bushing adjustment to provide approximately ±2.5 degrees of rear camber correction, useful after lowering when the...

Whiteline's KDT901 Positive Shift Kit adds four polyurethane inserts to the factory gearbox crossmember bushings rather than replacing the complete transmission mount. Filling the large voids in the original rubber reduces crossmember movement under load an...

The WORK Emotion ZR10 is a one-piece wheel made with WORK Flowforming Technology. This legacy AHG Matte Bronze package contains two 18x9.5 +38 5x114.3 wheels with the deep-concave face; the exact pair part number is WZR10189538YAHG. WORK’s current standard ...

Aeroflow Dynamics' V3 is an STI-style pedestal wing sized for the VB WRX trunk. The five-piece hybrid-polyurethane assembly is supplied unassembled with mounting hardware and a drilling template, and it is offered in gloss black or selected OEM-matched colo...

This Nameless Performance catback is the specific 2022+ WRX configuration with a four-inch muffler on each axle-back branch and quad four-inch double-wall tips. MPN SUCB22WRX-4MU-40SDW distinguishes it from Nameless muffler-delete, smaller-muffler, and alte...

ETS part 200-60-EXH-201 replaces the turbo-to-catback J-pipe on the 2022+ WRX 6MT. It uses three-inch 304 stainless tubing and a 400-cell Gen2 GESI catalyst, with hardware for the direct-fit exhaust location. This is a high-impact airflow and emissions-syst...

Overtake part A10560 clamps around the factory driveshaft center-support carrier to reduce its movement under acceleration, shifting, and load changes. The two-piece 6061-T6 aluminum assembly retains the original carrier rather than replacing the bearing or...

PERRIN's PSP-BRK-300 clutch delay valve delete replaces the restricted factory fitting in the WRX clutch hydraulic circuit. Removing the delay is intended to make clutch engagement track pedal movement more directly and reduce unwanted slip during quick shi...

PERRIN part PSP-INR-016 replaces the compliant factory bushing at the manual-transmission shifter linkage with a solid brass piece. Removing that deflection can make gear selection feel more direct and reduce side-to-side play, while also allowing more mech...

Process West PWFMIC10 is the complete Stage 1 front-mount intercooler kit with a raw/silver 525 x 350 x 75 mm bar-and-plate core and the required lightweight mandrel-bent charge piping. It moves the intercooler ahead of the radiator for more heat capacity t...

Subaru accessory J1010VC120 replaces the standard VB WRX grille with the genuine Sport Grille design while retaining the factory bumper opening and Subaru emblem position. It is a complete grille insert, not an emblem-only kit and not the separate Japanese ...

Subaru accessory E5610VC010 is the pair of black STI rear-quarter under-spoilers mounted at the outer lower corners of the VB WRX rear bumper. STI cross-references the same component as SG517VC210 in the Japanese accessory catalog. These are side spats, not...

Torque Solution TS-SU-092 is a polyurethane insert set for the factory rear-differential mount bushings used on 2008-2026 WRX applications. The pieces fill open areas in the original rubber rather than replacing the complete mount, reducing differential mov...

AMS part AMS.50.01.0001-1 replaces the flexible factory brake hoses with PTFE inner lines, a stainless-steel braid, and a protective outer coating. The construction is intended to reduce hose expansion and provide a firmer, more consistent pedal under repea...

The Billetworkz E-Brake Release Button replaces the small push button at the end of Subaru's mechanical parking-brake handle. It is a CNC-machined aluminum dress-up part offered in multiple finishes; it does not replace the lever, boot, ratchet mechanism, o...

COBB's CB-F51Z is a 24 mm solid front sway bar for the 2022-2026 WRX. Two end-link mounting positions let the installer choose between the available stiffness settings, while the supplied bushings replace the factory bar bushings. The bar is intended to red...

COBB's lowering springs for the VB WRX are a complete front and rear set (part CB-SUB009) designed as a direct replacement for the factory springs. They drop the car about 1.6 in. in front and 1.4 in. in the rear, which lowers the center of gravity, closes ...